Martine Patio Doors October 12th, 2017 - 11:35:12
The patio wheel adjusting screws are located at either end of the bottom section of the door. Some patio doors have a blanking plug covering the adjustment hole, remove the plug and use a torch to shine into the bottom section of the door to determine where the screw is located and what type of screw it is. There maybe two screws that are visible, one is an adjustment screw and the other is a fixing screw that holds the patio frame together. Use a long screwdriver to turn the adjusting screw in a clockwise direction to raise the patio. Adjust both wheels the same and check if the patio is level by almost closing the door and noting the gap between the door and the frame. Adjust the wheels until the gap is even all the way down. You may need to move the door locking keeper on the frame after adjusting the wheels. If this didnt solve the problem you may need to replace the patio wheels.
Bi Folding doors were launched around the turn of the century; they can be installed in place of French doors, where both doors are hinged to fold as they open together to one side. Bi folding doors can also span an opening to around 7 metres wide, depending on the frame chosen. A master door can be placed amongst the doors, at the ends or in the middle, wherever the opening is required; this door is a standard (pivot) opening door which enables the other doors to be pushed to the side or sides of the aperture, resulting in a sliding-folding action, concertina-style, to maximise the width of the opening between home and garden or conservatory.
Some manufactures offer optional extras, such as tinted glass, anti-sun, laminated, obscured glass and Argon-filled double-glazing. It is also possible to match existing period features by specifying Georgian bar or leaded-light in rectangular or diamond style. An innovative option is switchable privacy glass which enables molecules inside the double-glazing to become transparent or opaque at the press of a button; this is expensive, though, typically doubling the original price of good quality patio doors.
A visible "kitemark" on the glass is the consumers assurance that the double-glazed unit has been manufactured to British standards. The BSI has numerous standards, including: U-value verification, Window Energy Rating and Window Installation. The lower the U-value, the better the thermal performance and most local authorities will require this to be 1.8 or better to meet building regulations.