Vallee Patio Doors October 08th, 2017 - 01:44:30
Remove the two screws holding the bottom section of the frame. There is one screw either side of the bottom section. Once these have been removed the bottom section can be prized away from the rest of the frame. Be careful not to lever against the glass or you could shatter it. When the bottom section is clear from the rest of the frame you will be able to remove the wheels. Some wheels have a screw holding them in and some are pressed into a holding bracket. If the retaining screws have rusted you can carefully drill them out, taking care not to make the hole in the bottom section any bigger. Contact your local Hardware Store, Glazing Shop or search on Google for replacement wheels.
Going with a wooden door style means that youll probably pay a bit more, and youll need to keep up with their maintenance if you wish to keep them from getting that weathered look. However, wood is a luxurious material that provides your home with a natural ambience and charm. Patio doors can be found in hardwood types such as oak, cherry and mahogany, which are strong and blend well with many interiors and exterior areas.
Metal frames, usually aluminium, provide strength in compact form. As notoriously good conductors (which is a bad attribute for insulation), frames made from aluminium are thermally-broken, which is a good attribute. It means that the metals on the inside and outside of the door frames are not joined, preventing the temperatures from being transferred between them. A bare metal frame would look completely unattractive so it is powder-coated in a choice of over 100 standard colours, including a white that resembles pvc.
The patio wheel adjusting screws are located at either end of the bottom section of the door. Some patio doors have a blanking plug covering the adjustment hole, remove the plug and use a torch to shine into the bottom section of the door to determine where the screw is located and what type of screw it is. There maybe two screws that are visible, one is an adjustment screw and the other is a fixing screw that holds the patio frame together. Use a long screwdriver to turn the adjusting screw in a clockwise direction to raise the patio. Adjust both wheels the same and check if the patio is level by almost closing the door and noting the gap between the door and the frame. Adjust the wheels until the gap is even all the way down. You may need to move the door locking keeper on the frame after adjusting the wheels. If this didnt solve the problem you may need to replace the patio wheels.